Keeping it all together...

...with quality fasteners and gaskets.

-Better than "aircraft" specifications.
-Used/approved by all racing associations.
-Stainless, Black Oxide, Hex or 12 point!.
-100% compatible with any mod that uses factory parts.
-Turbo/Supercharger ready.
-Bundled in sets JUST FOR YOUR 3.0L!


Stage 8 Header Bolts for ALL 1986-2005 Ford Aerostar, Probe, Ranger, Taurus, Tempo, Mazda B3000, Mercury Sable and Topaz vehicles equipped with the 3.0L Vulcan V-6 Engines that are using AFTERMARKET HEADERS.   Do not attempt to use these for the factory cast iron manifolds, they are too short.

Stage 8 header kit $40 + S/H

3 sets in stock!


ARP Flywheel Bolts for ALL 1986-2005 Ford Aerostar, Probe, Ranger, Taurus, Tempo, Mazda B3000, Mercury Sable and Topaz vehicles equipped with the 3.0L Vulcan V-6 Engine and a STANDARD Transmission.

ARP Flywheel Bolt Set $34 + S/H

2 sets in stock!


ARP Head Studs for ALL 1986-7/1998 Ford Aerostar, Probe, Ranger, Taurus, Tempo, Mazda B3000, Mercury Sable and Topaz vehicles equipped with the 3.0L Vulcan V-6 Engine.

ARP Head Stud Set $170 + S/H

3 sets in stock!

ARP Main Studs for ALL 1986-2005 Ford Aerostar, Probe, Ranger, Taurus, Tempo, Mazda B3000, Mercury Sable and Topaz vehicles equipped with the 3.0L Vulcan V-6 Engines.

ARP Main Stud kit $125 + S/H

2 sets in stock!

FlatOut Rubber Coated Copper Head Gaskets! for ALL 1986-2005 Ford Aerostar, Probe, Ranger, Taurus, Tempo, Mazda B3000, Mercury Sable and Topaz vehicles equipped with the 3.0L Vulcan V-6 Engines.
One pair.  .050" (Factory thickness + "clean up cuts"), will hold 20lbs of boost if o-ringed, 30 w/ o-ring and receiver groove!  These will end your head gasket worries!  Use with the ARP head studs or with NEW factory bolts only.  Reuseable!  You must specify FWD (Probe, Taurus, Tempo, Sable and Topaz) or RWD (Aerostar, Ranger, Mazda B3000).

FlatOut Head Gasket (FWD/RWD .050") $135 + S/H
0 RWD, 1 FWD in stock!

Low compression gasket (8.5:1) to allow higher boost with a stock block and reciprocating assembly.   Please E-mail me BEFORE you order for custom sizes.  Available from .060 to .090" to lower compression, compensate for positive deck height or, correct for head/deck machining!

FlatOut Head Gasket (FWD/RWD .090") $180 + S/H - 1 RWD in stock!




Financing available for Head Stud and Copper Head Gasket Sets Combo, E-mail me for details!



ARP fasteners are coming soon: Oil Pan studs, Timing Cover and Water Pump Kits (Stainless!!)
Stay tuned!
Go to Rogue Performance!


This site and it's contents are protected by U.S. Copyright Law for unpublished works.
Unpublished anonymous and pseudonymous works, and works made for hire (corporate authorship)
are protected for 120 years from date of creation (FEB 6, 2001).  All articles and photos
are the property of Rogue Performance (or as marked) and may only be used with written permission.
Rogue Performance (Me) is in no way affiliated with the Ford Motor Company.

My work is not Public Domain, and should NOT be taken from this site. (I have already found some of my work on 3 other sites).
All photo's and drawings are my creations unless stated otherwise.  All links are with permission.
Want a copy of a picture, link or quote?  Just ask!  Please respect all copyright laws, I do! Thank you.

(Washington State UBI available upon request)